diLUSSO TH602MSL Panduan Instalasi & Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Instalasi & Panduan Pengguna untuk Kap Ventilasi diLUSSO TH602MSL. diLUSSO TH602MSL 12 halaman. Telescopic hood

Halaman Cetak

DUCTED MODE

Insert the butterfly valve into the flue hole, and turn clockwise to secure. The butterfly valve must

be used for ducted mode.

When installing the ducted version, connect the hood to the outlet

vent using either a flexible or rigid pipe ɸ 150 or ɸ 120 mm, the

choice of which is left to the installer.

To install a ɸ 120 mm air exhaust connection, insert the reducer

flange on the hood body outlet over the butterfly valve.

Fix the ducting using sufficient pipe clamps (not

supplied). Use minimal bends in the ducting for optimal power, increasing bends may reduce

performance of your hood

Ducting can extend either through the wall or the roof. Do not terminate the vent system in an

attic or other enclosed areas.

Remove possible charcoal filters.

RECIRCULATING MODE

The butterfly valve does not need to be installed when using recirculating mode.

Ensure the venting knob points to recirculating mode and the vents in front of the hood are not

blocked when hood is use. Ensure both charcoal filters and aluminum filters are installed. Charcoal

filters need to be replaced at regular intervals, refer to Maintenance section.