diLUSSO TH602MSL 설치 매뉴얼 및 사용자 매뉴얼 - 페이지 8

{카테고리_이름} diLUSSO TH602MSL에 대한 설치 매뉴얼 및 사용자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. diLUSSO TH602MSL 12 페이지. Telescopic hood

DUCTED MODE

Insert the butterfly valve into the flue hole, and turn clockwise to secure. The butterfly valve must

be used for ducted mode.

When installing the ducted version, connect the hood to the outlet

vent using either a flexible or rigid pipe ɸ 150 or ɸ 120 mm, the

choice of which is left to the installer.

To install a ɸ 120 mm air exhaust connection, insert the reducer

flange on the hood body outlet over the butterfly valve.

Fix the ducting using sufficient pipe clamps (not

supplied). Use minimal bends in the ducting for optimal power, increasing bends may reduce

performance of your hood

Ducting can extend either through the wall or the roof. Do not terminate the vent system in an

attic or other enclosed areas.

Remove possible charcoal filters.

RECIRCULATING MODE

The butterfly valve does not need to be installed when using recirculating mode.

Ensure the venting knob points to recirculating mode and the vents in front of the hood are not

blocked when hood is use. Ensure both charcoal filters and aluminum filters are installed. Charcoal

filters need to be replaced at regular intervals, refer to Maintenance section.