Motorola ASTRO APX 7000 Panduan Referensi Cepat - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Radio Dua Arah Motorola ASTRO APX 7000. Motorola ASTRO APX 7000 44 halaman. Digital portable radios
Juga untuk Motorola ASTRO APX 7000: Panduan Aksesori (4 halaman), Panduan Referensi Cepat (44 halaman), Kartu Referensi Cepat (2 halaman), Kartu Referensi Cepat (2 halaman)
Halaman Cetak
m
®
ASTRO
APX™ 7000 Series
Digital Portable Radios
Quick Reference Card
RF Energy Exposure and Product Safety
Guide for Portable Two-Way Radios
ATTENTION!
This radio is restricted to Occupational use only. Before using
the radio, read the RF Energy Exposure and Product Safety
Guide for Portable Two-Way Radios which contains important
operating instructions for safe usage and RF energy awareness
and control for Compliance with applicable standards and
Regulations.
Radio Controls
Top (Orange)
Button
__________
2-Position
Microphone
Concentric Switch
__________
Secondary Speaker
Accessory
Menu Select
Connector
Buttons
Main Display
Home Button
Keypad
4-Way Navigation
Button
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners.
16-Position
Select Knob
__________
On/Off/Volume
Control Knob
Top Side (Select)
Button
__________
PTT Button
3-Position A/B/C
Switch
Side Button 1
__________
__________
Side Button 2
__________
Radio On/Off
• On – On/Off/Volume knob clockwise.
• Off – On/Off/Volume knob counterclockwise.
Data Feature
Button
Zones and Channels
• Zone – Zone switch to desired zone.
• Channel – Channel switch to desired channel.
Receiving and Transmitting
Antenna
1
Select zone/channel.
2
Listen for a transmission.
OR
Press and hold Volume Set button.
OR
Top
Press Monitor button and listen for activity.
Display
3
Adjust volume, if necessary.
Bluetooth
Pairing
4
Press the PTT button to transmit; release to
Indicator
receive.
Main
Speaker
Sending an Emergency Alarm
1
Press and hold the Emergency button*.
2
The display shows Emergency and the
Battery
current zone/channel. Radio sounds a short,
medium-pitched tone, and the LED blinks red
momentarily.
3
When acknowledgment is received, you hear
four beeps; alarm ends; and radio exits
emergency.
* Default emergency button press timer is set
to 1 second. This timer is programmable, see
Sending an Emergency Alarm section in the
user guide for details.
To exit emergency at any time, press and hold
the Emergency button.
English