Motorola ASTRO APX 7000 Короткий довідник - Сторінка 3

Переглянути онлайн або завантажити pdf Короткий довідник для Двостороннє радіо Motorola ASTRO APX 7000. Motorola ASTRO APX 7000 44 сторінки. Digital portable radios
Також для Motorola ASTRO APX 7000: Посібник з використання аксесуарів (4 сторінок), Короткий довідник (44 сторінок), Коротка довідкова картка (2 сторінок), Коротка довідкова картка (2 сторінок)

Motorola ASTRO APX 7000 Короткий довідник
m
®
ASTRO
APX™ 7000 Series
Digital Portable Radios
Quick Reference Card
RF Energy Exposure and Product Safety
Guide for Portable Two-Way Radios
ATTENTION!
This radio is restricted to Occupational use only. Before using
the radio, read the RF Energy Exposure and Product Safety
Guide for Portable Two-Way Radios which contains important
operating instructions for safe usage and RF energy awareness
and control for Compliance with applicable standards and
Regulations.
Radio Controls
Top (Orange)
Button
__________
2-Position
Microphone
Concentric Switch
__________
Secondary Speaker
Accessory
Menu Select
Connector
Buttons
Main Display
Home Button
Keypad
4-Way Navigation
Button
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners.
16-Position
Select Knob
__________
On/Off/Volume
Control Knob
Top Side (Select)
Button
__________
PTT Button
3-Position A/B/C
Switch
Side Button 1
__________
__________
Side Button 2
__________
Radio On/Off
• On – On/Off/Volume knob clockwise.
• Off – On/Off/Volume knob counterclockwise.
Data Feature
Button
Zones and Channels
• Zone – Zone switch to desired zone.
• Channel – Channel switch to desired channel.
Receiving and Transmitting
Antenna
1
Select zone/channel.
2
Listen for a transmission.
OR
Press and hold Volume Set button.
OR
Top
Press Monitor button and listen for activity.
Display
3
Adjust volume, if necessary.
Bluetooth
Pairing
4
Press the PTT button to transmit; release to
Indicator
receive.
Main
Speaker
Sending an Emergency Alarm
1
Press and hold the Emergency button*.
2
The display shows Emergency and the
Battery
current zone/channel. Radio sounds a short,
medium-pitched tone, and the LED blinks red
momentarily.
3
When acknowledgment is received, you hear
four beeps; alarm ends; and radio exits
emergency.
* Default emergency button press timer is set
to 1 second. This timer is programmable, see
Sending an Emergency Alarm section in the
user guide for details.
To exit emergency at any time, press and hold
the Emergency button.
English