Motorola GP140 Series Panduan Pengguna - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Radio Dua Arah Motorola GP140 Series. Motorola GP140 Series 20 halaman. Professional radio, power distribution and controller
Juga untuk Motorola GP140 Series: Informasi Layanan (32 halaman), Informasi Layanan (30 halaman), Panduan Servis Dasar (46 halaman), Informasi Layanan (30 halaman)
Halaman Cetak
GETTING STARTED
Radio On-Off/Volume Control
ON
•
Turn the On-Off/Volume Control knob clock-
wise to turn on the radio. You will hear the Self
Test Pass Tone and see a green LED if the radio
powers up successfully. If the radio fails its self
test, you will hear the Self Test Fail Tone.
•
Turn the On-Off/Volume Control knob counter-
clockwise, until a click is heard, to turn off the
radio.
Adjusting the Radio's Volume
1. Press and hold the Volume Set key; you will
hear a continuous tone.
2. Turn the On-Off/Volume Control knob and
adjust the volume level.
3. Release the Volume Set key.
Selecting a Radio Channel
Your radio offers sixteen (16) channels for easy
access to required conventional channels. Some
channels on your radio may not be programmed.
Check with your dealer for more information.
Turn the Channel Selector knob clockwise or
counter-clockwise until you reach the desired
channel.
Sending a Call
OFF
1. Use the Channel Selector knob to change to
the required channel.
2. Press the PTT, and speak clearly with your
mouth about 2.5 to 5 cm (one to two inches)
away from the microphone.
3. Release the PTT when you finish speaking.
Receiving a Call
1. Turn your radio on.
2. Adjust its volume level.
3. Switch to the desired channel.
4. If at any time a call comes through, you will hear
the call at the volume level you have set.
English
7