- ページ 9

双方向ラジオ Motorola GP140 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola GP140 Series 20 ページ。 Professional radio, power distribution and controller
Motorola GP140 Series にも：サービス情報 (32 ページ), サービス情報 (30 ページ), 基本サービスマニュアル (46 ページ), サービス情報 (30 ページ)

ページを印刷する

GETTING STARTED

Radio On-Off/Volume Control

•

Turn the On-Off/Volume Control knob clock-

wise to turn on the radio. You will hear the Self

Test Pass Tone and see a green LED if the radio

powers up successfully. If the radio fails its self

test, you will hear the Self Test Fail Tone.

•

Turn the On-Off/Volume Control knob counter-

clockwise, until a click is heard, to turn off the

radio.

Adjusting the Radio's Volume

1. Press and hold the Volume Set key; you will

hear a continuous tone.

2. Turn the On-Off/Volume Control knob and

adjust the volume level.

3. Release the Volume Set key.

Selecting a Radio Channel

Your radio offers sixteen (16) channels for easy

access to required conventional channels. Some

channels on your radio may not be programmed.

Check with your dealer for more information.

Turn the Channel Selector knob clockwise or

counter-clockwise until you reach the desired

channel.

Sending a Call

OFF

1. Use the Channel Selector knob to change to

the required channel.

2. Press the PTT, and speak clearly with your

mouth about 2.5 to 5 cm (one to two inches)

away from the microphone.

3. Release the PTT when you ﬁnish speaking.

Receiving a Call

1. Turn your radio on.

2. Adjust its volume level.

3. Switch to the desired channel.

4. If at any time a call comes through, you will hear

the call at the volume level you have set.

English