Argox PT-60 Panduan Memulai Cepat - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk PDA Argox PT-60. Argox PT-60 2 halaman.
Install or replace the main battery in the terminal
1. Slide the main battery compartment cover lock to
the FREE position and remove the cover
Charge LED
Press mobile computer
firmly into cradle
Single slot Serial / USB Cradle
Download ActiveSync ® 4.5 or higher from
computer.
The PT-60 mobile computer let you link to a
host computer through the CRD-20 cradle for
data communication.
PT-60
2. Load a Li-Polymer battery pack into the main battery
compartment in the direction shown in the figure
3. Attach the battery compartment cover to the
terminal and slide the main battery compartment
cover lock to the LOCK position.
Red = Normal charge / Green = Full Charge
http://www.microsoft.com
!
Install or replace the main battery in the gun grip
Be sure to turn the terminal off before you do this
Spare Battery
Charge LED
and follow the instructions to install ActiveSync onto the host
"
#
Follow the on screen ActiveSync instructions to
establish a connection between the PT-60 and
the host computer.
Support Information
More Information on the PT-60
Visit the Argox Web site http://
Setting up, Using and troubleshooting the PT-60
PT-60 User's Manual
Available at http://
www.argox.com
49-P60001-001 Rev. A – November 2008
KEYPADS
1. Turn the screw
2. Open the cover
www.argox.com
Quick Start Guide