Argox PT-60 Посібник із швидкого старту - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для КПК Argox PT-60. Argox PT-60 2 сторінки.

Install or replace the main battery in the terminal

1. Slide the main battery compartment cover lock to

the FREE position and remove the cover

Charge LED

Press mobile computer

firmly into cradle

Single slot Serial / USB Cradle

Download ActiveSync ® 4.5 or higher from

computer.

The PT-60 mobile computer let you link to a

host computer through the CRD-20 cradle for

data communication.

PT-60

2. Load a Li-Polymer battery pack into the main battery

compartment in the direction shown in the figure

3. Attach the battery compartment cover to the

terminal and slide the main battery compartment

cover lock to the LOCK position.

Red = Normal charge / Green = Full Charge

http://www.microsoft.com

Install or replace the main battery in the gun grip

Be sure to turn the terminal off before you do this

Spare Battery

Charge LED

and follow the instructions to install ActiveSync onto the host

Follow the on screen ActiveSync instructions to

establish a connection between the PT-60 and

the host computer.

Support Information

More Information on the PT-60

Visit the Argox Web site http://

Setting up, Using and troubleshooting the PT-60

PT-60 User's Manual

Available at http://

www.argox.com

49-P60001-001 Rev. A – November 2008

KEYPADS

1. Turn the screw

2. Open the cover

www.argox.com

Quick Start Guide