Motorola P080 Panduan Pengguna - Halaman 24

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Radio Motorola P080. Motorola P080 33 halaman. Professional radio
Juga untuk Motorola P080: Manual Penjualan (44 halaman)

Halaman Cetak

Sending the Phone Number

After the access code is sent, you should wait for a

dialling tone before sending your phone number.

You can send

¥ a phone number that is stored in the radio, or

¥ a new number.

Additionally, depending on how your radio is

programmed, if you use the keypad to send a

number, the radio can send the numbers in one of

the following ways:

¥ live dial

¥ buffered dial.

Check with your dealer for details.

Sending a Stored Phone Number

You can access the stored phone numbers by

¥ recalling the last number dialled,

¥ using the phone list, or

¥ using the speed dial feature.

Method

Steps to Take

Last

Press and release the PTT; the radio sends

Number

the last number dialled.

Redial

Method

Steps to Take

1. Press < or > to scroll the phone list

until you reach the desired phone

Phone

number.

List

2. Press and release the PTT to send the

number.

1. Press and release the programmed Speed

Dial button.

2. Press the numbered keys (1-9)

corresponding to the Þrst nine phone

Speed

numbers in the phone list. Press Ò0Ó if you

Dial

want the last number dialled.

3. If your radio uses buffered dial, press and

release the PTT.

4. The radio sends out the phone number.

The method described is not applicable for radios which

manually send the access code; these radios can access this

number from the phone list or the speed dial.

For radios that manually send the access code, press the

Down Key once to access the last number dialled.

English