Motorola P080 사용자 설명서 - 페이지 24

{카테고리_이름} Motorola P080에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola P080 33 페이지. Professional radio
Motorola P080에 대해서도 마찬가지입니다: 판매 매뉴얼 (44 페이지)

Motorola P080 사용자 설명서

Sending the Phone Number

After the access code is sent, you should wait for a
dialling tone before sending your phone number.
You can send
¥ a phone number that is stored in the radio, or
¥ a new number.
Additionally, depending on how your radio is
programmed, if you use the keypad to send a
number, the radio can send the numbers in one of
the following ways:
¥ live dial
¥ buffered dial.
Check with your dealer for details.
Sending a Stored Phone Number
You can access the stored phone numbers by
¥ recalling the last number dialled,
¥ using the phone list, or
¥ using the speed dial feature.
Method
Steps to Take
Last
Press and release the PTT; the radio sends
Number
the last number dialled.
*
Redial
Method
Steps to Take
1. Press < or > to scroll the phone list
until you reach the desired phone
Phone
number.
List
2. Press and release the PTT to send the
number.
1. Press and release the programmed Speed
Dial button.
2. Press the numbered keys (1-9)
corresponding to the Þrst nine phone
Speed
numbers in the phone list. Press Ò0Ó if you
Dial
want the last number dialled.
3. If your radio uses buffered dial, press and
release the PTT.
4. The radio sends out the phone number.
*
The method described is not applicable for radios which
manually send the access code; these radios can access this
number from the phone list or the speed dial.
For radios that manually send the access code, press the
Down Key once to access the last number dialled.
English
21