Motorola P080 사용자 설명서 - 페이지 22

{카테고리_이름} Motorola P080에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola P080 33 페이지. Professional radio
Motorola P080에 대해서도 마찬가지입니다: 판매 매뉴얼 (44 페이지)

페이지 인쇄

TALKBACK

If the programmable Talkback option is set, you can

respond to any calls received during the scan

operation by pressing the PTT before the

programmed hang-time ends. Check with your

dealer for details.

DELETING A NUISANCE CHANNEL

If a channel continually generates unwanted calls or

noise (a ÒnuisanceÓ Channel), you can temporarily

remove it from the scan list by performing a

Nuisance Channel Delete operation.

1. While the radio is on the Nuisance Channel,

press the Nuisance Channel Delete button

(only available if programmed by your dealer)

until you hear a tone.

2. Release the Nuisance Channel Delete

button. The nuisance channel is deleted.

NOTE: You cannot perform a Nuisance Channel

Delete on a priority channel or if there is only

one remaining channel in the scan list.

ADDING A DELETED NUISANCE CHANNEL

BACK TO THE SCAN LIST

1. Press the Scan button to stop the scan

operation.

2. Press the Scan button again to re-start the

scan operation. The Deleted Nuisance

Channel is reinstated to the scan list.

PRIORITIZATION OF A SCAN LIST

MEMBER

You may want your radio to check a particular

channel more frequently for calls. Prioritization of

scan list members is done by your dealer using the

Customer Programming Software. Check with your

dealer for details.

Priority Channel

Ch1 Ch2 Ch3

None speciÞed

Ch4

Ch2 Ch1 Ch2 Ch3

Channel 2

Ch2 Ch4 Ch2 ...Ch1

Even though your radio has switched to a non-

priority channel, your radio will still check for activity

on the priority channel. If activity is detected the

radio will switch to the priority channel.

Scanning Sequence

...

Ch1

English