Epson LABELWORKS PX Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Epson LABELWORKS PX. Epson LABELWORKS PX 4 halaman.
Juga untuk Epson LABELWORKS PX: Panduan Operator (14 halaman)

Halaman Cetak

Part Names and Functions

Body

1. Saves and recalls the label.

7. Changes the input method of the

character keys. Hold down

2. Feeds and then cuts the tape.

and press this for caps lock.

3. Prints a label. Hold down

and

8. Enters a character with an accent.

press this to print with a special

print function.

9. Space

4. Character keys

10. Cursor keys

5. Shift

11. Enters a symbol.

6. Turns the printer on and o .

12. Con rms the settings. Hold down

Start Here

1. Connecting the supplied AC adapter

Using batteries (commercially available)

CAUTION

Be sure to use only the supplied AC adapter.

1. Connect the AC adapter as shown

below.

Using Label Editor Professional

CAUTION

Do not connect the printer to the computer until you are instructed to

do so.

Label Editor Professional is an application software for editing

label. For how to install and operate the software,

see "Label Editor Professional User's Guide".

When you are prompted to connect the printer on the software

installer screen, connect the printer and the computer with a

USB cable.

2. Installing a tape cartridge

CAUTION

• Make sure that the power is turned o .

• You cannot use tape other than PX-tape.

• Make sure the top cover is closed rmly.

• If you opened the top cover while a tape cartridge is

installed, check that the tape end is put into the tape

eject slot before beginning operation.

• Take care to keep the label for detecting the tape

cartridge and the sensor of the printer clean.

Otherwise, tape may no longer be detected correctly.

• Do not touch the sensor directly with your ngers.

Detection label

Sensor

3. Turning the power on

1. Press

Auto power-o

If there is no key operation within ve minutes, the printer

automatically turns o . (The characters you have entered in

the current session are stored.) Furthermore, if there is no key

operation within an hour while connected to a computer,

the printer automatically turns o .

13. Delete. Hold down

this to clear all text and/or setting.

14. Creates a barcode label.

15. Creates multiple labels at once.

Hold down

to create labels for wrap around

cable.

16. Creates an equipment

management label.

Hold down

to create labels for wrap around

cable like a ag.

17. Creates a general label, or escapes

from Flag label mode, Wrap label

mode, or Mix Length mode.

18. Text orientation

19. Changes the font size.

20. Change the font type.

21. Sets the format and style.

22. Sets the tape length. Hold down

and press this to sets the

margins.

23. Creates a label with a sequence

number.

Hold down

to create with block sequence

numbers.

24. Previews the created label. Hold

down

preference.

25. Display

and press this to add a block.

CAUTION

• Be sure to turn o the power before installing the batteries.

• Use AA alkaline batteries. Other types of batteries cannot be used.

• When disposing of used batteries, make sure to follow the regulations.

• When you have printed continuously for 30 minutes using alkaline batteries,

leave the printer for at least one hour to allow the batteries to cool down.

1. Remove the

2. Insert the batteries with

battery cover.

the correct polarity.

1. Rewind the ink ribbon.

3. Install a tape cartridge.

Use a pen

or a pencil.

Put the tape end

into the tape eject

slot.

2. Open the top cover.

4. Close the top cover.

Top cover

Feeding the tape

CAUTION

Be sure to feed the tape every time after you install

a tape cartridge.

1. Press

2. Select a function with

press

Tape feed

Feeds the tape.

Feed and cut

Feeds the tape and then cuts the tape.

Display

and press

and press this

The display shows the current settings and characters

you have entered.

You can change the language shown on the setting

screen and menu.

"Language" of "Changing the Printer Settings"

1. Set tape width and length

The unit can be switched between inch and cm.

2. Block number

and press this

3. Row number

4. Indicators

Displays the type, setting state, setting items,

and mode, etc. of the tape cartridge currently

and press this to display

set in

"Indicators"

5. Cursor

6. Preview display

4. Entering text

1. Press

2. Press

3. Press

A list of characters appears.

4. Select a character with

press

"â" is entered.

3. Close the

battery cover.

5. Press keys:

"Câble" appears on the screen.

6. Press

to switch to the symbol input mode.

7. Press

"#" is entered.

8. Press

to switch to the alphabet

input mode.

9. Press keys:

5. Printing label

1. Press

Setting the label auto

cut to O

Printing with special

print functions

Checking the print preview

1. Press

The print image scrolls on the entire screen.

When the preview ends, the editing screen reappears.

6. Attaching label

1. Peel o the backing paper.

Tape eject slot

2. Attach the label and rub it rmly.

7. Turning the power o

1. Press

The characters you have entered in

and then

the current session are stored even

after the printer is turned o . They

are displayed when it is turned on

again.

2. When using the AC adapter,

unplug the power cable from

the outlet and disconnect the AC

adapter plug from the printer.

Indicators

Save the created label

Change the font

Change the font size

Deleting text

1. Press

and

Deleting all text

1. Press

2. Select a function with

" Auto cut" of "Changing the

Printer Settings"

"Utilizing Print Functions"

Remaining battery level

Displays character size.

"Changing the Font Size"

Half cut ON

"Auto cut" of "Changing the

Printer Settings"

Auto cut ON

"Auto cut" of "Changing the

Printer Settings"

The Heat Shrink Tube tape cartridge

is set.

The Self-Lamination Overwrap tape

cartridge is set.

Flag mode

"Creating Labels to Wrap

around Cable like a Flag"

Cable wrap mode (Creating cable

wrap label)

"Creating Labels to Wrap

Around Cable"

Mix-Length mode

"Creating Multiple Labels at

Once"

Symbol input mode

Caps Lock ON

" Saving Frequently

Used Labels"

"Changing the Font"

" Changing the Font

Size"

A character is deleted backward.

and

then press

Text Only

Deletes all text.

Text & Setting

Deletes all text and restores the font size and other

settings to the initial settings.

All Format

Deletes all text and format.

Depending on the label type you create, "All

Format" may not be displayed.

CAUTION

• Do not insert your ngers into the tape eject slot.

• Do not pull the tape until the printing is completed.

Attention

• "Insert tape" will appear on the display if the tape

cartridge is not loaded or not correctly set.

• Length of the label shown on the display is a guide

and may not match the length of the printed label

exactly.

• Label over 16m in length cannot be printed.

MEMO

• To cancel the printing, press

• Depending on your margin setting or the label type,

tape may be fed and cut before printing.

CAUTION

Depending on the environment where you use labels

and the nature of the adhered surface, the labels may

be peeled or discoloured, and the adhesive may remain

on or damage the adhered surface. Be sure to check the

environment and the nature of the adhered surface

before use. K-Sun takes no responsibility for any damage

or loss due to the above mentioned causes.

CAUTION

• "Powering o ." is displayed while turning o this

printer. Do not remove the batteries or disconnect

the AC adapter until this message disappears.

• When you don't use the printer for a long period of

time, remove the batteries, disconnect the AC

adapter, and remove the tape cartridge from the

printer.