Epson LABELWORKS PX Gebruikershandleiding - Pagina 2
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson LABELWORKS PX. Epson LABELWORKS PX 4 pagina's.
Ook voor Epson LABELWORKS PX: Gebruikershandleiding (14 pagina's)
![Epson LABELWORKS PX Gebruikershandleiding](/uploads/products/server2/611494/611494.jpg)
Part Names and Functions
Body
24
23
22
21
20
1
2
3
4
5
6
7
8
9
1. Saves and recalls the label.
7. Changes the input method of the
character keys. Hold down
2. Feeds and then cuts the tape.
and press this for caps lock.
3. Prints a label. Hold down
and
8. Enters a character with an accent.
press this to print with a special
print function.
9. Space
4. Character keys
10. Cursor keys
5. Shift
11. Enters a symbol.
6. Turns the printer on and o .
12. Con rms the settings. Hold down
Start Here
1. Connecting the supplied AC adapter
Using batteries (commercially available)
CAUTION
Be sure to use only the supplied AC adapter.
1. Connect the AC adapter as shown
below.
Using Label Editor Professional
CAUTION
Do not connect the printer to the computer until you are instructed to
do so.
Label Editor Professional is an application software for editing
label. For how to install and operate the software,
see "Label Editor Professional User's Guide".
When you are prompted to connect the printer on the software
installer screen, connect the printer and the computer with a
USB cable.
2. Installing a tape cartridge
CAUTION
• Make sure that the power is turned o .
• You cannot use tape other than PX-tape.
• Make sure the top cover is closed rmly.
• If you opened the top cover while a tape cartridge is
installed, check that the tape end is put into the tape
eject slot before beginning operation.
• Take care to keep the label for detecting the tape
cartridge and the sensor of the printer clean.
Otherwise, tape may no longer be detected correctly.
• Do not touch the sensor directly with your ngers.
Detection label
Sensor
3. Turning the power on
1. Press
.
Auto power-o
If there is no key operation within ve minutes, the printer
automatically turns o . (The characters you have entered in
the current session are stored.) Furthermore, if there is no key
operation within an hour while connected to a computer,
the printer automatically turns o .
13. Delete. Hold down
this to clear all text and/or setting.
14. Creates a barcode label.
15. Creates multiple labels at once.
Hold down
to create labels for wrap around
25
cable.
18
16. Creates an equipment
19
17
management label.
Hold down
16
to create labels for wrap around
15
cable like a ag.
14
17. Creates a general label, or escapes
from Flag label mode, Wrap label
13
mode, or Mix Length mode.
18. Text orientation
12
19. Changes the font size.
11
20. Change the font type.
21. Sets the format and style.
10
22. Sets the tape length. Hold down
and press this to sets the
margins.
23. Creates a label with a sequence
number.
Hold down
to create with block sequence
numbers.
24. Previews the created label. Hold
down
preference.
25. Display
and press this to add a block.
CAUTION
• Be sure to turn o the power before installing the batteries.
• Use AA alkaline batteries. Other types of batteries cannot be used.
• When disposing of used batteries, make sure to follow the regulations.
• When you have printed continuously for 30 minutes using alkaline batteries,
leave the printer for at least one hour to allow the batteries to cool down.
1. Remove the
2. Insert the batteries with
battery cover.
the correct polarity.
1. Rewind the ink ribbon.
3. Install a tape cartridge.
Use a pen
or a pencil.
Put the tape end
into the tape eject
slot.
2. Open the top cover.
4. Close the top cover.
Top cover
Feeding the tape
CAUTION
Be sure to feed the tape every time after you install
a tape cartridge.
1. Press
.
2. Select a function with
press
.
Tape feed
Feeds the tape.
Feed and cut
Feeds the tape and then cuts the tape.
Display
and press
and press this
and press this
The display shows the current settings and characters
you have entered.
You can change the language shown on the setting
screen and menu.
"Language" of "Changing the Printer Settings"
1. Set tape width and length
The unit can be switched between inch and cm.
2. Block number
and press this
3. Row number
4. Indicators
Displays the type, setting state, setting items,
and mode, etc. of the tape cartridge currently
and press this to display
set in
.
"Indicators"
5. Cursor
6. Preview display
4. Entering text
1. Press
+
2. Press
.
3. Press
.
A list of characters appears.
4. Select a character with
press
.
"â" is entered.
3. Close the
battery cover.
5. Press keys:
"Câble" appears on the screen.
6. Press
to switch to the symbol input mode.
7. Press
.
"#" is entered.
8. Press
to switch to the alphabet
input mode.
9. Press keys:
5. Printing label
1. Press
.
Setting the label auto
cut to O
Printing with special
print functions
Checking the print preview
1. Press
.
The print image scrolls on the entire screen.
When the preview ends, the editing screen reappears.
6. Attaching label
1. Peel o the backing paper.
Tape eject slot
2. Attach the label and rub it rmly.
7. Turning the power o
1. Press
.
The characters you have entered in
/
and then
the current session are stored even
after the printer is turned o . They
are displayed when it is turned on
again.
2. When using the AC adapter,
unplug the power cable from
the outlet and disconnect the AC
adapter plug from the printer.
Indicators
Save the created label
Change the font
.
Change the font size
Deleting text
1. Press
/
and
Deleting all text
1. Press
,
,
2. Select a function with
,
,
" Auto cut" of "Changing the
Printer Settings"
"Utilizing Print Functions"
Remaining battery level
Displays character size.
"Changing the Font Size"
Half cut ON
"Auto cut" of "Changing the
Printer Settings"
Auto cut ON
"Auto cut" of "Changing the
Printer Settings"
The Heat Shrink Tube tape cartridge
is set.
The Self-Lamination Overwrap tape
cartridge is set.
Flag mode
"Creating Labels to Wrap
around Cable like a Flag"
Cable wrap mode (Creating cable
wrap label)
"Creating Labels to Wrap
Around Cable"
Mix-Length mode
"Creating Multiple Labels at
Once"
Symbol input mode
Caps Lock ON
" Saving Frequently
Used Labels"
"Changing the Font"
" Changing the Font
Size"
.
A character is deleted backward.
+
.
/
and
then press
.
Text Only
Deletes all text.
Text & Setting
Deletes all text and restores the font size and other
settings to the initial settings.
All Format
Deletes all text and format.
Depending on the label type you create, "All
Format" may not be displayed.
CAUTION
• Do not insert your ngers into the tape eject slot.
• Do not pull the tape until the printing is completed.
Attention
• "Insert tape" will appear on the display if the tape
cartridge is not loaded or not correctly set.
• Length of the label shown on the display is a guide
and may not match the length of the printed label
exactly.
• Label over 16m in length cannot be printed.
MEMO
• To cancel the printing, press
.
• Depending on your margin setting or the label type,
tape may be fed and cut before printing.
CAUTION
Depending on the environment where you use labels
and the nature of the adhered surface, the labels may
be peeled or discoloured, and the adhesive may remain
on or damage the adhered surface. Be sure to check the
environment and the nature of the adhered surface
before use. K-Sun takes no responsibility for any damage
or loss due to the above mentioned causes.
CAUTION
• "Powering o ." is displayed while turning o this
printer. Do not remove the batteries or disconnect
the AC adapter until this message disappears.
• When you don't use the printer for a long period of
time, remove the batteries, disconnect the AC
adapter, and remove the tape cartridge from the
printer.