Epson SecurColor TM-C3400 Panduan Memulai Cepat - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pembuat label Epson SecurColor TM-C3400. Epson SecurColor TM-C3400 8 halaman. Color label printer
Juga untuk Epson SecurColor TM-C3400: Brosur & Spesifikasi (8 halaman), Spesifikasi (8 halaman), Manual Pencetakan (10 halaman), Mulai di sini (2 halaman), Instal Manual (17 halaman)
Halaman Cetak
EPSON TM-C3400
SecurColor Color Ink-jet printer
*IMPORTANT - These settings are to be adjusted AFTER the intial
printer setup outlined on pp. 2-6 has been completed.
To begin, please go to the 'Start' menu. Click on 'Devices and Printers'.
Right click on the Epson printer and go to 'Printer Preferences'.
Under the 'General' tab:
1. Ensure Media Type is set to 'Fine Media Label'
2. Create your name tag size by clicking on 'Add/Del (W)' by 'Media Layout'
to create a 4x3 or 4x6 badge. Once you create your name tag size, name
this this tag (For example: '4x3 Name Tag') under 'Media Layout Name'.
Click Save and OK. Ensure this new tag is selected from the drop down
menu under 'Media Layout'
[Note-If the diagram of the nametag is defaulting to mm instead of inches,
back out of this screen and go into the 'Driver Utilities' tab and click on
'Driver Preferences'. Ensure 'Units to Use' at the bottom of the screen is
set to inches.]
3. 'Print Quality' should be set to 'Quality'
4. 'Media Source' should be set to 'Roll Media', and 'Save Roll Media' set to
'No Saving'
5. 'Auto Cut' should be set to 'After Every Page'
6. Under the 'Page Layout' tab, ensure 'Orientation' is set to 'Portrait'
7. Under the 'Maintenance and Utilities' tab, click on 'Media Position
Detection' and ensure it is set to 'No Detection'
QUICK REFERENCE SHEET
PRINT SETTINGS 4"x3" NAME TAG
Item# UEPS
www.pcnametag.com
1-800-233-9767
8