Epson SecurColor TM-C3400 빠른 시작 매뉴얼 - 페이지 8

{카테고리_이름} Epson SecurColor TM-C3400에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson SecurColor TM-C3400 8 페이지. Color label printer
Epson SecurColor TM-C3400에 대해서도 마찬가지입니다: 브로셔 및 사양 (8 페이지), 사양 (8 페이지), 인쇄 매뉴얼 (10 페이지), 여기에서 시작 (2 페이지), 설치 매뉴얼 (17 페이지)

페이지 인쇄

EPSON TM-C3400

SecurColor Color Ink-jet printer

*IMPORTANT - These settings are to be adjusted AFTER the intial

printer setup outlined on pp. 2-6 has been completed.

To begin, please go to the 'Start' menu. Click on 'Devices and Printers'.

Right click on the Epson printer and go to 'Printer Preferences'.

Under the 'General' tab:

1. Ensure Media Type is set to 'Fine Media Label'

2. Create your name tag size by clicking on 'Add/Del (W)' by 'Media Layout'

to create a 4x3 or 4x6 badge. Once you create your name tag size, name

this this tag (For example: '4x3 Name Tag') under 'Media Layout Name'.

Click Save and OK. Ensure this new tag is selected from the drop down

menu under 'Media Layout'

[Note-If the diagram of the nametag is defaulting to mm instead of inches,

back out of this screen and go into the 'Driver Utilities' tab and click on

'Driver Preferences'. Ensure 'Units to Use' at the bottom of the screen is

set to inches.]

3. 'Print Quality' should be set to 'Quality'

4. 'Media Source' should be set to 'Roll Media', and 'Save Roll Media' set to

'No Saving'

5. 'Auto Cut' should be set to 'After Every Page'

6. Under the 'Page Layout' tab, ensure 'Orientation' is set to 'Portrait'

7. Under the 'Maintenance and Utilities' tab, click on 'Media Position

Detection' and ensure it is set to 'No Detection'

QUICK REFERENCE SHEET

PRINT SETTINGS 4"x3" NAME TAG

Item# UEPS

www.pcnametag.com

1-800-233-9767