Motorola PRM240 i Panduan Pengguna - Halaman 21

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Modem Motorola PRM240 i. Motorola PRM240 i 36 halaman. Motorola wireless modem user manual

Halaman Cetak

PRM240i Wireless Modem User Manual ____________________________________________ Care & Maintenance

Charging the Modem Battery

Your modem's lithium-ion battery is supplied discharged. For optimum

performance, you should charge it fully before use. If during use, the

Low battery indicator starts flashing red, the battery needs immediate

recharging or it should be swapped with a re-charged unit.

The modem battery is automatically recharged simultaneously with the

iPAQ when both units are inserted into the iPAQ Desktop Cradle (as

supplied with the iPAQ) or when directly connected to the mains

adaptor via the iPAQ serial port (depending on iPAQ model – refer to

your iPAQ user manual)

Follow the steps below to charge the iPAQ and modem's battery:

1. Connect your iPAQ to the modem.

Slide the iPAQ into the desktop cradle.

2. Plug the iPAQ battery charger into a power source and the iPAQ

cradle. The iPAQ battery charging indicator on the iPAQ front

panel will flash when the iPAQ is charging and the battery

charging indicator on the rear face of the modem battery will also

flash when it is charging.

Note: Perform an overnight charge when charging the modem's

battery for the first time.

3. When the iPAQ and battery charging indicators fully illuminate

both batteries are fully charged. If only one indicator fully

illuminates, only that corresponding battery is fully charged.

4. Remove the iPAQ and modem from the cradle when fully charged.

When the modem battery is fully charged, the internal charger stops

charging until the battery capacity falls below a certain value. The

battery charger will then automatically start recharging the batteries

again.

68P80802E60-O

Motorola