Motorola PRM240 i Panduan Pengguna - Halaman 22

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Modem Motorola PRM240 i. Motorola PRM240 i 36 halaman. Motorola wireless modem user manual

Halaman Cetak

Care & Maintenance ____________________________________________ PRM240i Wireless Modem User Manual

Using Your PRM240i Modem

Switching the Modem On/Off

The non-rugged PRM240i modem does not contain a manual on/off

power switch. The modem is automatically powered on/off when the

iPAQ Pocket PC is inserted and removed respectively.

Before operating your non-rugged PRM240i modem ensure the battery

is fully charged, Modem Info software has been installed on the iPAQ

and the iPAQ is inserted into the modem, as described earlier.

Upon first iPAQ insertion the modem Power/On-Line indicator should

display slow flashing green (once per second) as the modem searches

for a network connection. As soon as the modem is registered the

Power/On-Line indicator will fully illuminate. If network access is

denied or no network can be found the Power/On-Line indication will

continue to search to flash until it can register somewhere. On

subsequent insertions the Power/On-Line indicator will reflect the

power mode state set in the Modem Info application (refer to page 25).

If the Low Battery display starts flashing red, the battery needs

charging. See the previous section, Charging the Modem Battery on

page 21, for further information.

The iPAQ and non-rugged PRM240i modem is now ready for use.

Using the Modem Info Application

Modem Info is a graphical user interface modem diagnostic and

information tool to enable you to:

Check the network connection status and modem parameters

Check the modem hardware and battery status

Set the various operating modes of the modem

Send and Receive short text messages

modem events

Modem Info consisting of a single screen with six tabs. These tabs are

described in the following sub-sections.

To access ModemInfo, select the ModemInfo application from the

main screen. By default the Setup tab is displayed.

Motorola

68P80802E60-O