Epson 1705C - PowerLite XGA LCD Projector Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat lunak Epson 1705C - PowerLite XGA LCD Projector. Epson 1705C - PowerLite XGA LCD Projector 3 halaman. Release of check tool for network projectors v1.00 for windows
Juga untuk Epson 1705C - PowerLite XGA LCD Projector: Panduan Pengguna (42 halaman), Panduan Pengoperasian (36 halaman), Pengaturan Cepat (4 halaman), Panduan Pengoperasian (47 halaman), Panduan Instalasi (19 halaman), Panduan Pengguna (1 halaman), Daftar Bagian (1 halaman), Pembaruan Dokumentasi (12 halaman), Manual Fungsi (5 halaman), Spesifikasi (2 halaman), Manual Perangkat Lunak (2 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (34 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman)

CHOOSE A PRESENTATION METHOD

"Tethered" (recommended when viewing video)

1. Make sure you've turned on the projector

and adjusted the image as described earlier.

2. Locate the computer cable that came with

the projector.

Connect one end to the projector's blue

Computer (Component Video) port.

Connect the other end to the laptop's video

out port (may also be blue) or monitor port.

3. Press the Source Search button on the

projector or the remote control and use the

directional arrow button to select

'computer.'

4. If you see a blank or blue screen that reads

"No signal," hold down the FN (function)

key on the keyboard and tap the F4 or F5

key (

) until the image is on your

desktop as well as projecting to the screen.

(Allow a few seconds for the projector to

sync up.)

You may see this: