Epson 1705C - PowerLite XGA LCD Projector Panduan Memulai Cepat

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat lunak Epson 1705C - PowerLite XGA LCD Projector. Epson 1705C - PowerLite XGA LCD Projector 3 halaman. Release of check tool for network projectors v1.00 for windows
Juga untuk Epson 1705C - PowerLite XGA LCD Projector: Panduan Pengguna (42 halaman), Panduan Pengoperasian (36 halaman), Pengaturan Cepat (4 halaman), Panduan Pengoperasian (47 halaman), Panduan Instalasi (19 halaman), Panduan Pengguna (1 halaman), Daftar Bagian (1 halaman), Pembaruan Dokumentasi (12 halaman), Manual Fungsi (5 halaman), Spesifikasi (2 halaman), Manual Perangkat Lunak (2 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (34 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman)

Halaman Cetak

Epson 1705C - PowerLite XGA LCD Projector Panduan Memulai Cepat

(adapted from the original: http://files.support.epson.com/pdf/pl1705/pl1705qs.pdf

(adapted from the original: http://files.support.epson.com/pdf/pl1705/pl1705qs.pdf)

TURN ON YOUR EQUIPMENT

1. Connect the power cord to the back of the

Connect the power cord to the back of the

projector and plug the other end into an

electrical outlet.

2. Open the A/V Mute slide. Make sure the

Open the A/V Mute slide. Make sure the

slide is opened completely.

3. To turn the projector on, press the

To turn the projector on, press the

Power button on the projector or the

remote control. The projector beep

trol. The projector beeps once,

and the projector's Power light flashes

green and then stays on.

CAUTION: Before unplugging the

projector...

Shut down the projector properly:

1. Press the

2. When the orange light stops flashing

When the orange light stops flashing

and the projector beeps, you can unplug

the projector.

Epson PowerLite 1705c Quick Start Guide

Power button twice.

tton twice.

ADJUST THE IMAGE

1. To raise the image, press the blue foot

release button for the front adjustable foot

release button for th

and lift the front. Release the button to

lock the foot in position.

2. Turn the focus ring to sharpen the image.

Turn the focus ring to sharpen the image.

Turn the zoom ring to reduce or enlarge the

image.

3. If your image looks like

If your image looks like

move the projector so that it is directly in

front of the screen, facing the screen

squarely.

4. If your image looks like

If your image looks like

pres the

projector to correct it.

press the blue foot

Release the button to

buttons on the