Epson 1705C - PowerLite XGA LCD Projector 빠른 시작 매뉴얼

{카테고리_이름} Epson 1705C - PowerLite XGA LCD Projector에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 1705C - PowerLite XGA LCD Projector 3 페이지. Release of check tool for network projectors v1.00 for windows
Epson 1705C - PowerLite XGA LCD Projector에 대해서도 마찬가지입니다: 사용자 설명서 (42 페이지), 운영 매뉴얼 (36 페이지), 빠른 설정 (4 페이지), 운영 매뉴얼 (47 페이지), 설치 매뉴얼 (19 페이지), 사용자 설명서 (1 페이지), 부품 목록 (1 페이지), 문서 업데이트 (12 페이지), 기능 설명서 (5 페이지), 사양 (2 페이지), 소프트웨어 설명서 (2 페이지), 제품 지원 게시판 (25 페이지), 제품 지원 게시판 (22 페이지), 제품 지원 게시판 (28 페이지), 제품 지원 게시판 (41 페이지), 제품 지원 게시판 (34 페이지), 제품 지원 게시판 (28 페이지), 제품 지원 게시판 (15 페이지), 제품 지원 게시판 (22 페이지)

페이지 인쇄
Epson 1705C - PowerLite XGA LCD Projector 빠른 시작 매뉴얼
(adapted from the original: http://files.support.epson.com/pdf/pl1705/pl1705qs.pdf
(adapted from the original: http://files.support.epson.com/pdf/pl1705/pl1705qs.pdf
(adapted from the original: http://files.support.epson.com/pdf/pl1705/pl1705qs.pdf)
TURN ON YOUR EQUIPMENT
1. Connect the power cord to the back of the
Connect the power cord to the back of the
projector and plug the other end into an
projector and plug the other end into an
electrical outlet.
2. Open the A/V Mute slide. Make sure the
Open the A/V Mute slide. Make sure the
slide is opened completely.
3. To turn the projector on, press the
To turn the projector on, press the
Power button on the projector or the
Power button on the projector or the
remote control. The projector beep
trol. The projector beeps once,
and the projector's Power light flashes
and the projector's Power light flashes
green and then stays on.
CAUTION: Before unplugging the
CAUTION: Before unplugging the
projector...
Shut down the projector properly:
Shut down the projector properly:
1. Press the
2. When the orange light stops flashing
When the orange light stops flashing
and the projector beeps, you can unplug
and the projector beeps, you can unplug
the projector.
Epson PowerLite 1705c Quick Start Guide
Epson PowerLite 1705c Quick Start Guide
Power button twice.
tton twice.
ADJUST THE IMAGE
1. To raise the image, press the blue foot
release button for the front adjustable foot
release button for th
and lift the front. Release the button to
lock the foot in position.
lock the foot in position.
2. Turn the focus ring to sharpen the image.
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or enlarge the
Turn the zoom ring to reduce or enlarge the
image.
3. If your image looks like
If your image looks like
move the projector so that it is directly in
move the projector so that it is directly in
front of the screen, facing the screen
front of the screen, facing the screen
squarely.
4. If your image looks like
If your image looks like
pres the
projector to correct it.
projector to correct it.
press the blue foot
Release the button to
or
or
or
buttons on the