Epson 1705C - PowerLite XGA LCD Projector Hızlı Başlangıç Kılavuzu

Yazılım Epson 1705C - PowerLite XGA LCD Projector için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Epson 1705C - PowerLite XGA LCD Projector 3 sayfaları. Release of check tool for network projectors v1.00 for windows
Ayrıca Epson 1705C - PowerLite XGA LCD Projector için: Kullanıcı Kılavuzu (42 sayfalar), Kullanım Kılavuzu (36 sayfalar), Hızlı Kurulum (4 sayfalar), Kullanım Kılavuzu (47 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kullanıcı Kılavuzu (1 sayfalar), Parça Listesi (1 sayfalar), Dokümantasyon Güncellemesi (12 sayfalar), İşlev Kılavuzu (5 sayfalar), Teknik Özellikler (2 sayfalar), Yazılım Kılavuzu (2 sayfalar), Ürün Destek Bülteni (25 sayfalar), Ürün Destek Bülteni (22 sayfalar), Ürün Destek Bülteni (28 sayfalar), Ürün Destek Bülteni (41 sayfalar), Ürün Destek Bülteni (34 sayfalar), Ürün Destek Bülteni (28 sayfalar), Ürün Destek Bülteni (15 sayfalar), Ürün Destek Bülteni (22 sayfalar)

Sayfayı Yazdır

Epson 1705C - PowerLite XGA LCD Projector Hızlı Başlangıç Kılavuzu

(adapted from the original: http://files.support.epson.com/pdf/pl1705/pl1705qs.pdf

(adapted from the original: http://files.support.epson.com/pdf/pl1705/pl1705qs.pdf)

TURN ON YOUR EQUIPMENT

1. Connect the power cord to the back of the

Connect the power cord to the back of the

projector and plug the other end into an

electrical outlet.

2. Open the A/V Mute slide. Make sure the

Open the A/V Mute slide. Make sure the

slide is opened completely.

3. To turn the projector on, press the

To turn the projector on, press the

Power button on the projector or the

remote control. The projector beep

trol. The projector beeps once,

and the projector's Power light flashes

green and then stays on.

CAUTION: Before unplugging the

projector...

Shut down the projector properly:

1. Press the

2. When the orange light stops flashing

When the orange light stops flashing

and the projector beeps, you can unplug

the projector.

Epson PowerLite 1705c Quick Start Guide

Power button twice.

tton twice.

ADJUST THE IMAGE

1. To raise the image, press the blue foot

release button for the front adjustable foot

release button for th

and lift the front. Release the button to

lock the foot in position.

2. Turn the focus ring to sharpen the image.

Turn the focus ring to sharpen the image.

Turn the zoom ring to reduce or enlarge the

image.

3. If your image looks like

If your image looks like

move the projector so that it is directly in

front of the screen, facing the screen

squarely.

4. If your image looks like

If your image looks like

pres the

projector to correct it.

press the blue foot

Release the button to

buttons on the