Epson 1715C - PowerLite XGA LCD Projector Pengaturan Cepat

Jelajahi secara online atau unduh pdf Pengaturan Cepat untuk Perangkat lunak Epson 1715C - PowerLite XGA LCD Projector. Epson 1715C - PowerLite XGA LCD Projector 4 halaman. Remote control information
Juga untuk Epson 1715C - PowerLite XGA LCD Projector: Panduan Pengguna (42 halaman), Panduan Pengoperasian (36 halaman), Panduan Pengoperasian (47 halaman), Panduan Instalasi (19 halaman), Panduan Pengguna (1 halaman), Daftar Bagian (1 halaman), Pembaruan Dokumentasi (12 halaman), Manual Fungsi (5 halaman), Manual Perangkat Lunak (2 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (34 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman), Spesifikasi (2 halaman), Buku Panduan Instalasi (8 halaman)

Turn On Your Equipment

C onnect the power cord to the back of the projector and plug the other

end into an electrical outlet.

Open the A/V Mute slide. Make sure the slide is opened completely.

R emove the battery cover on the remote control. Locate the two AAA

batteries that came with the projector and insert them. Then replace

the battery cover.

T o turn the projector on, press the Power button on the projector or

the remote control. The projector beeps once, and the projector's

Power light flashes green and then stays on.

Power button

CAUTION: Before unplugging the projector...

Shut the projector down properly:

1. Press the

2. When the orange light stops flashing and the projector beeps,

you can unplug the projector.

Adjust the Image

T o raise the image, press the blue foot release button for the front

adjustable foot and lift the front. Release the button to lock the

foot in position.

PowerLite

Power button twice.

Quick Setup

1705c/ 1715c