Epson 1715C - PowerLite XGA LCD Projector Pengaturan Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Pengaturan Cepat untuk Perangkat lunak Epson 1715C - PowerLite XGA LCD Projector. Epson 1715C - PowerLite XGA LCD Projector 4 halaman. Remote control information
Juga untuk Epson 1715C - PowerLite XGA LCD Projector: Panduan Pengguna (42 halaman), Panduan Pengoperasian (36 halaman), Panduan Pengoperasian (47 halaman), Panduan Instalasi (19 halaman), Panduan Pengguna (1 halaman), Daftar Bagian (1 halaman), Pembaruan Dokumentasi (12 halaman), Manual Fungsi (5 halaman), Manual Perangkat Lunak (2 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (34 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman), Spesifikasi (2 halaman), Buku Panduan Instalasi (8 halaman)

Halaman Cetak
Epson 1715C - PowerLite XGA LCD Projector Pengaturan Cepat
2
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or enlarge the image.
Focus
3
I f your image looks like
to one side of the screen at an angle. Place it directly in front of the
screen, facing the screen squarely.
4
I f your image looks like
the projector to correct it.
3
Choose a
Presentation Method
How do you want to get images to the projector?
•
T o connect to a notebook, see "If connecting
to a notebook" below.
•
T o project over a wireless network, see
"If projecting wirelessly" on the back of this sheet.
Y ou must have installed the projector's EasyMP™ software and
configured your projector and computer before you can project
wirelessly. See your User's Guide for instructions.
•
T o give a presentation stored on a flash drive, digital camera, or
other USB storage device, see Chapter 5 in your User's Guide.
•
T o connect to your notebook using the included USB cable, see
your User's Guide.
If connecting to a notebook...
1
M ake sure you've turned on the projector and adjusted the image
as described in sections 1 and 2.
2
L ocate the computer cable that came with the projector. Connect
one end to the projector's blue Computer (Component Video)
port.
Connect the other end to your notebook's video-out port or
monitor port.
3
P ress the Source Search button on the projector or the remote
control until your computer image is displayed.
or
, you've placed the projector off
or
, press the
Zoom
or
buttons on
Computer cable
Turn over