Epson 1715C - PowerLite XGA LCD Projector Panduan Pengoperasian - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Perangkat lunak Epson 1715C - PowerLite XGA LCD Projector. Epson 1715C - PowerLite XGA LCD Projector 47 halaman. Remote control information
Juga untuk Epson 1715C - PowerLite XGA LCD Projector: Panduan Pengguna (42 halaman), Panduan Pengoperasian (36 halaman), Pengaturan Cepat (4 halaman), Panduan Instalasi (19 halaman), Panduan Pengguna (1 halaman), Daftar Bagian (1 halaman), Pembaruan Dokumentasi (12 halaman), Manual Fungsi (5 halaman), Manual Perangkat Lunak (2 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (34 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman), Spesifikasi (2 halaman), Buku Panduan Instalasi (8 halaman)

Installing EasyMP Monitor

From here, continue with the installation by following the

on-screen messages.

Limitations imposed by a Windows Vista or

Windows 7 environment

When using EasyMP Monitor under Windows Vista or Windows 7, note

the following limitations.

• You must have administrator authority in order to use Register at

startup on the Environment setup screen of EasyMP Monitor. s

• If EasyMP Monitor is installed on your computer, uninstall it before

you update the operating system to Windows Vista or Windows 7.

Updating your OS without uninstalling the software may cause a

malfunction. s

p.46

Check the following points before starting up EasyMP Monitor.

• EasyMP Monitor must be installed on the computer to be used for

monitoring and control.

• The computer and the projectors must be connected to the network.

• If using Windows 2000/Windows NT4.0/Windows XP/Windows

Vista/Windows 7, the computer must be started up in Administrator

mode.

• Depending on the projector model, a commercially-available serial W

TCP/IP conversion adapter and a connection cable are required in

order to use EasyMP Monitor. s Projector's User's Guide

Make the settings for the serial W TCP/IP conversion adapter before

connecting to the projector.

p.27