Epson 3170 - Perfection Photo Panduan Pemecahan Masalah - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pemecahan Masalah untuk Perangkat lunak Epson 3170 - Perfection Photo. Epson 3170 - Perfection Photo 12 halaman. Scanning tips and troubleshooting guide
Juga untuk Epson 3170 - Perfection Photo: Buletin Dukungan Produk (34 halaman), Panduan Pengguna (6 halaman), Mulai di sini (4 halaman), Buletin Dukungan Produk (23 halaman), Manual (11 halaman), Buletin Dukungan Produk (40 halaman), Buletin Dukungan Produk (17 halaman), Buletin Dukungan Produk (24 halaman), Buletin Dukungan Produk (29 halaman), Buletin Dukungan Produk (8 halaman), Petunjuk Keselamatan Penting (4 halaman), Buletin Dukungan Produk (3 halaman), Buletin Dukungan Produk (14 halaman), Buletin Dukungan Produk (18 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (40 halaman), Buletin Dukungan Produk (40 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (21 halaman)

PLACING FILM OR SLIDES ON SCANNER

You can scan 35mm slides, 35mm film or negative strips, and Medium Format

transparencies on the Epson 3170 using the appropriate film holders which come with the

scanner.

1. The first step is always to open the document cover and

slide up the reflective document mat gently to remove it.

Please remember to replace the reflective document mat

when you are finished.

1. Place the film holder on the document table so that

the triangle mark on its tab is aligned with the triangle

on the document table. The projection on the tab then

goes into the hole on the document table.

Second, load the transparency into the film holder and position

it on the document table.

Now go to the section listed below that matches the type of

transparency you want to scan.