Epson 7800 - Stylus Pro Color Inkjet Printer Manual Pembongkaran dan Pengaturan - Halaman 20

Jelajahi secara online atau unduh pdf Manual Pembongkaran dan Pengaturan untuk Perangkat lunak Epson 7800 - Stylus Pro Color Inkjet Printer. Epson 7800 - Stylus Pro Color Inkjet Printer 27 halaman. Stylus pro 800 series
Juga untuk Epson 7800 - Stylus Pro Color Inkjet Printer: Brosur & Spesifikasi (8 halaman), Spesifikasi (4 halaman), Panduan Memulai (10 halaman), Panduan Pengguna (11 halaman), Panduan Referensi Cepat (12 halaman), Panduan Tambahan (1 halaman), Garansi Terbatas (12 halaman), Brosur & Spesifikasi (8 halaman), Buletin Dukungan Produk (10 halaman), Brosur & Spesifikasi (16 halaman), Lembar Pemberitahuan (4 halaman)

6. Make sure that the Power light is not flashing,

and then set the paper lever to the released

position. The LEVER RELEASED. LOAD PAPER

appears on the LCD panel.

Caution:

Do not set the paper lever to the released

position while the Power light is flashing.

Doing so may damage the printer.

7. Insert the paper into the paper insertion slot.

8. Pull the paper down through the paper

insertion slot so that it comes out below.

Note:

If the roll paper does not come out, follow the

instructions below.

❏ Adjust the feed strength by pressing the

Paper Feed buttons on the control panel.

When using thick, heavy, or curled paper,

press the Paper Feed u button to

increase the power. When using thin or

light paper, press the Paper Feed d

button to decrease the power.

❏ If the paper does not come out even after

executing the procedure above, open the

front cover and pull the paper out

manually.

9. Holding the bottom edge of the paper, turn the

roll paper to remove slack. Make sure that the

bottom edge of the paper is straight, and that

it is aligned with the horizontal line.

Note:

You do not have to align the right end of the paper

with the vertical line.

10. Set the paper lever to the secured position, and

close the roll paper cover. PRESS PAUSE

BUTTON appears.