Epson FX 890 Panduan Pengguna - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat lunak Epson FX 890. Epson FX 890 48 halaman. Impact printer
Juga untuk Epson FX 890: Lembar Spesifikasi (1 halaman), Spesifikasi (2 halaman), Manual (11 halaman), Setup Manual (2 halaman), Panduan Informasi Produk (19 halaman), Referensi Cepat (12 halaman), Spesifikasi (2 halaman)

Adjusting the Paper-Thickness Setting

Before you start printing, make sure the paper-thickness setting is correct

for the type of paper you are using.

Turn the printer off and

open the printer cover.

The paper-thickness lever

is located on the left side of

the printer. The numbers

next to the lever indicate

the thickness setting.

Select the correct setting according to this table:

Paper type

Ordinary paper

Thin paper

Carbonless multipart forms with:

2 parts (original + 1 copy)

3 parts (original + 2 copies)

4 parts (original + 3 copies)

5 parts (original + 4 copies)

6 parts (original + 5 copies)

7 parts (original + 6 copies)

Continuous paper with labels

Postcards

Envelopes

Available when using the tractor in the bottom or front pull position.

Note:

❏

When the temperature is 41°F (5°C) or lower, or 95°F (35°C) or higher, set

the paper-thickness lever one position lower to improve print quality.

❏

When the temperature is 41°F (5°C) or lower, or 95°F (35°C) or higher,

multipart forms with 7 parts cannot be used.

Paper Handling

Lever position

0 or 1 (single sheets)

0 (continuous paper)

5 or 6