Epson FX 890 Gebruikershandleiding - Pagina 18

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Epson FX 890. Epson FX 890 48 pagina's. Impact printer
Ook voor Epson FX 890: Specificatieblad (1 pagina's), Specificaties (2 pagina's), Handmatig (11 pagina's), Installatiehandleiding (2 pagina's), Handleiding productinformatie (19 pagina's), Snelle referentie (12 pagina's), Specificaties (2 pagina's)

Adjusting the Paper-Thickness Setting

Before you start printing, make sure the paper-thickness setting is correct

for the type of paper you are using.

Turn the printer off and

open the printer cover.

The paper-thickness lever

is located on the left side of

the printer. The numbers

next to the lever indicate

the thickness setting.

Select the correct setting according to this table:

Paper type

Ordinary paper

Thin paper

Carbonless multipart forms with:

2 parts (original + 1 copy)

3 parts (original + 2 copies)

4 parts (original + 3 copies)

5 parts (original + 4 copies)

6 parts (original + 5 copies)

7 parts (original + 6 copies)

Continuous paper with labels

Postcards

Envelopes

Available when using the tractor in the bottom or front pull position.

Note:

❏

When the temperature is 41°F (5°C) or lower, or 95°F (35°C) or higher, set

the paper-thickness lever one position lower to improve print quality.

❏

When the temperature is 41°F (5°C) or lower, or 95°F (35°C) or higher,

multipart forms with 7 parts cannot be used.

Paper Handling

Lever position

0 or 1 (single sheets)

0 (continuous paper)

5 or 6