Eci Telecom b-focus 270pr Panduan Pengguna - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Router Jaringan Eci Telecom b-focus 270pr. Eci Telecom b-focus 270pr 11 halaman. Adsl bridge
Halaman CetakB-FOCuS Bridge 270PR
3. Installation Procedure
1. Turn off your computer and all peripheral devices (printer, monitor, etc.).
2. Connect one end of the power cable to the connector on the back of the modem
labeled "Power", and plug the other end of the cable into a standard 220v power
outlet.
3. Connect one end of the RJ11 telephone cable to the ADSL port on the back of
the ADSL modem, and connect the other end to your ADSL port on the splitter.
4. Connect one end of the RJ45 Ethernet cable to the LAN port on the back of the
ADSL modem, and the other end to your LAN port, on the back-side of your
computer.
Note:
If using a hub for connection with multiple computers, connect one end
of the Ethernet RJ45 cable to the LAN port on the modem and the other
end to the hub. Then connect all the computers sharing the ADSL line
to the hub. (See Figure 3-2.)
5. Power on your PC and the B-FOCuS Bridge 270PR modem.
6. After the modem is powered on, the Power LED will be on and the ADSL Sync
will blink, indicating that the modem is trying to synchronize with the
telephone exchange equipment. Once synchronization is complete, the ADSL
Sync will remain on continuously (not blinking).
The B-FOCuS Bridge 270PR installation is complete. The modem is ready for
Internet use.
ECI Telecom Ltd. and/or Inovia Telecoms Ltd. Proprietary
3
User Manual
421056-0900-010-0995