Eci Telecom b-focus 270pr 사용자 설명서 - 페이지 7

{카테고리_이름} Eci Telecom b-focus 270pr에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Eci Telecom b-focus 270pr 11 페이지. Adsl bridge

B-FOCuS Bridge 270PR

3. Installation Procedure

1. Turn off your computer and all peripheral devices (printer, monitor, etc.).

2. Connect one end of the power cable to the connector on the back of the modem

labeled "Power", and plug the other end of the cable into a standard 220v power

outlet.

3. Connect one end of the RJ11 telephone cable to the ADSL port on the back of

the ADSL modem, and connect the other end to your ADSL port on the splitter.

4. Connect one end of the RJ45 Ethernet cable to the LAN port on the back of the

ADSL modem, and the other end to your LAN port, on the back-side of your

computer.

Note:

If using a hub for connection with multiple computers, connect one end

of the Ethernet RJ45 cable to the LAN port on the modem and the other

end to the hub. Then connect all the computers sharing the ADSL line

to the hub. (See Figure 3-2.)

5. Power on your PC and the B-FOCuS Bridge 270PR modem.

6. After the modem is powered on, the Power LED will be on and the ADSL Sync

will blink, indicating that the modem is trying to synchronize with the

telephone exchange equipment. Once synchronization is complete, the ADSL

Sync will remain on continuously (not blinking).

The B-FOCuS Bridge 270PR installation is complete. The modem is ready for

Internet use.

ECI Telecom Ltd. and/or Inovia Telecoms Ltd. Proprietary

User Manual

421056-0900-010-0995