Epson Perfection 1670 Photo Panduan Servis - Halaman 27

Jelajahi secara online atau unduh pdf Panduan Servis untuk Perangkat lunak Epson Perfection 1670 Photo. Epson Perfection 1670 Photo 46 halaman. Color image scanner
Juga untuk Epson Perfection 1670 Photo: Informasi Produk (7 halaman), Mulai Manual (9 halaman), Manual (11 halaman), Memperbarui (1 halaman), Buletin Dukungan Produk (17 halaman), Buletin Dukungan Produk (12 halaman), Petunjuk Keselamatan Penting (4 halaman), Brosur & Spesifikasi (2 halaman)

EPSON Perfection 1670 Photo/Perfection 1270

Disconnect the Inverter Cable Connector and Fluorescent Lamp Connector connected

to the TPU Inverter Board.

Remove the two screws (CBP M3x8) that are securing the Inverter Board, and remove

the Inverter Board together with the Protective Sheet.

Open the Protective Sheet, and remove the TPU Inverter Board.

When reinstalling the TPU Inverter Unit, connect the Inverter Cable

in the following procedure.

Insert the Stopper of the Inverter Cable into the socket of the

TPU Inverter Unit. Fit the Stopper with its delta mark on the

outside.

Set the Expansion Tube of the Inverter Cable into the notch of

the TPU Inverter Unit.

Put the Inverter Cable on the rail of the TPU Inverter Unit,

hold down the Inverter Cable with your finger, and connect it

to the TPU Unit.

Expansion Tube

Stopper

DISASSEMBLY/ASSEMBLY

Delta mark

Socket

Inverter Cable

Disassembly Procedure

CBP (M3x8)

Tightening torque 6-8kgfcm

Inverter Connector Cable

Figure 2-28. Disconnection of Connector Cable

Protective Sheet

TPU Inverter Board

Figure 2-29. Removal of TPU Inverter Board

Revision B

Fluorescent Lamp Connector