Dimplex BLF74 Panduan Servis - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Servis untuk Perapian Dalam Ruangan Dimplex BLF74. Dimplex BLF74 16 halaman. Section 10309 manufactured electric fireplaces
Juga untuk Dimplex BLF74: Panduan Pengguna (3 halaman)

Halaman Cetak

7. Remove the 2 screws, that secure the cover panel

(Figure 13), located at the top of the mirror on the left

side of the unit.

8. Remove the two screws on either side of the heater/

blower assembly and gently lower the assembly so that

the top can be viewed.

CAUTION: When removing the blower assembly

mounting screws, support the assembly to prevent any

damage to the unit.

9. Remove the 6 screws (3 sets) that secure the blower to

the assembly (Figure 14).

10. Disconnect the wiring connections noting their original

locations.

NOTE: Using a flat head screwdriver gently pry

between the end of the connectors and the blower/fan to

release the wires.

11. Properly orient the new blower/fan assembly and con-

nect all of the wiring connections.

12. Reassemble in the reverse order as above.

Figure 14

Mounting Screws