Eckman EKETC6 Buku Petunjuk - Halaman 11

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Anakan Eckman EKETC6. Eckman EKETC6 15 halaman. With optional roller

b).Insert a piece of paper between the cutter bar and the reel blades and carefully turn the reel blades

by hand.

c).All blades should slice the paper evenly along the entire length of the cutter bar while the reel turns

smoothly.

d).If the mower has an intermittent cut, adjustment should be made to the appropriate sides of the

blades to attain proper cutting action. Remember, only adjust in tiny increments.

4.General care

To extend the life if the equipment, clean, lightly oil and store the machine and accessories during

inclement weather. Minimum care is required to ensure smooth operation. To avoid damage to the

cutting blades, keep the area to be mowed free from any debris like small stones. For best results

regularly apply oil or lubricant to the machine, accessories, bearings and any other moving parts.

WARNING Keep cutter bar free from any debris.

VII. Changing Accessory Cassettes

Fitting and changing accessory cassettes only takes a few moments provided you follow

these instructions. This 3-in-1 machine is supplied with the mower accessory already

fitted.

To remove the mower cassette, first unscrew the two butterfly bolts(see Figure3) (one on

each side of the machine). After removing these two bolts, squeeze the spring loaded

connectors(see Figure 4) inwards with two hands(remember to wear protective

gloves) ,then pull out the mower cassette carefully(see Figure 5). You may find it easier

to first remove the handle and set the adjustable height to maximum.

Butterfly bolt

Figure 3

Figure 4 Spring loaded connector