Epson PowerLite 737c Informasi Produk - Halaman 17

Jelajahi secara online atau unduh pdf Informasi Produk untuk Perangkat lunak Epson PowerLite 737c. Epson PowerLite 737c 24 halaman. Release of check tool for network projectors v1.00 for windows
Juga untuk Epson PowerLite 737c: Panduan Pengguna (42 halaman), Panduan Pengoperasian (36 halaman), Panduan Pengaturan Cepat (2 halaman), Panduan Pengoperasian (47 halaman), Daftar Bagian (1 halaman), Buletin Dukungan Produk (30 halaman), Panduan Instalasi (19 halaman), Panduan Pengguna (1 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (38 halaman), Buletin Dukungan Produk (12 halaman), Buletin Dukungan Produk (42 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (34 halaman), Buletin Dukungan Produk (38 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (15 halaman), Buletin Dukungan Produk (22 halaman), Pengaturan Cepat (2 halaman)

Halaman Cetak

3. Click

Use IP connect mode

screen:

4. Click

. You see this screen:

IP connection

5. Enter the projector's IP address and click

The IP address appears in the Projector list and a

searching icon displays.

Indicates

search in

progress

If the search fails to find a projector with the specified IP

address, the searching icon turns into a question mark.

If this happens, run EasyMP to check the projector's IP

address, then repeat this step.

, then click

. You see this

Epson PowerLite 737c Projector

Note:

If you still don't see the projector, make sure the Internet

connection firewall is disabled.

6. Click the projector you want to connect to, then click the

button. If more than one projector is listed, you

Connect

can select additional projectors and connect to them at the

same time.

7. If you are prompted for a keyword, enter the four-digit

number displayed on the EasyMP Network screen and

click

Removing the Wireless 802.11 b/g Card

Follow these steps to remove the card from your projector.

1. If you're running NS Connection, click

control bar.

2. Check the card access light to make sure it isn't flashing.

Caution:

Never remove the card while the card access light is green or

flashing. You may damage the card or lose data.

3. Press the eject button. The button pops out.

Eject button

Access light

4. Press the eject button again. The wireless card partially

ejects.

5. Pull the card straight out. Then press the eject button back

in to prevent it from being damaged.

2/05

Disconnect

Click here

Epson PowerLite 737c Projector

on the