Epson PowerLite 8300i with EasyMP.net module Buletin Dukungan Produk - Halaman 8

Jelajahi secara online atau unduh pdf Buletin Dukungan Produk untuk Perangkat lunak Epson PowerLite 8300i with EasyMP.net module. Epson PowerLite 8300i with EasyMP.net module 15 halaman. Release of check tool for network projectors v1.00 for windows
Juga untuk Epson PowerLite 8300i with EasyMP.net module: Panduan Pengguna (42 halaman), Panduan Pengoperasian (36 halaman), Panduan Pengoperasian (47 halaman), Pengaturan Cepat (2 halaman), Buletin Dukungan Produk (27 halaman), Panduan Cepat (20 halaman), Daftar Bagian (1 halaman), Panduan Tambahan (2 halaman), Brosur & Spesifikasi (2 halaman), Panduan Pengguna (1 halaman), Buletin Dukungan Produk (25 halaman), Buletin Dukungan Produk (22 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (41 halaman), Buletin Dukungan Produk (34 halaman), Buletin Dukungan Produk (28 halaman), Buletin Dukungan Produk (22 halaman), Pengaturan Cepat (2 halaman)

Settings Display

Uncheck the boxes for the buttons

that you do not want to display in

Advanced Mode.

[Note] Be sure to set the projector to Network ON in Standby Mode in the Extended Menu.

1) Download "Epson12378.exe" from Epson website. This file contains

"ProjectorControlSetup.exe" which is used to install EPSON Projector Control for

Windows V.1.00 on the computer.

2) Set up your computer and the projector to connect over a network.

3) Start the EPSON Projector Control software as follows: "Start" "Program" "EPSON

Projector" "Projector Control V1.00." Then the main screen is displayed. Click

"Tool" "Settings" on the main screen. The setting screen is displayed.

4) Enter the Projector IP Address, click "OK" to save, and close the setting screen.

Page 4 of 5

PSB.2007.09.001

Uncheck the boxes for

the buttons that you do

not want to display in

Simple Mode.