Epson Stylus Pro 10000 Series Panduan Referensi Cepat - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Perangkat lunak Epson Stylus Pro 10000 Series. Epson Stylus Pro 10000 Series 12 halaman. Auto take-up reel unit
Juga untuk Epson Stylus Pro 10000 Series: Spesifikasi (6 halaman), Informasi Produk (16 halaman), Panduan Instalasi (26 halaman), Panduan Instalasi Cepat (34 halaman), Garansi (28 halaman), Panduan Referensi Cepat (12 halaman), Spesifikasi (4 halaman), Spesifikasi (1 halaman), Panduan Perakitan (12 halaman), Panduan Pengguna (13 halaman)

Replacing Ink Cartridges (Continued)

Carefully pull the empty cartridge straight out of the

printer.

If ink gets on your hands, wash them

thoroughly with soap and water. If ink gets into

your eyes, flush them immediately with water.

Make sure the replacement cartridge is the correct

color, and remove it from its package.

If you're using Archival ink, shake the cartridge gently

before installing it.

Hold the cartridge with the arrow mark on the left

side and pointing to the rear of the printer. Then

insert the cartridge into the slot. Don't force it.

If you can't insert the cartridge smoothly, you

may have the wrong cartridge. Check the

package and product code.

Push the cartridge clamp back into the locked

position. Make sure the corresponding

goes off.

If the Ink Out light remains on, the cartridge

may not be installed correctly. Remove the

cartridge and then reinsert it as described

above.

Close the ink compartment cover.

light

Ink Out