Epson Stylus Pro 10000 Series Quick Reference Manual - Page 8

Browse online or download pdf Quick Reference Manual for Software Epson Stylus Pro 10000 Series. Epson Stylus Pro 10000 Series 12 pages. Auto take-up reel unit
Also for Epson Stylus Pro 10000 Series: Specifications (6 pages), Product Information (16 pages), Installation Manual (26 pages), Quick Installation Manual (34 pages), Warranty (28 pages), Quick Reference Manual (12 pages), Specifications (4 pages), Specifications (1 pages), Assembly Manual (12 pages), User Manual (13 pages)

Print Page

Replacing Ink Cartridges (Continued)

Carefully pull the empty cartridge straight out of the

printer.

If ink gets on your hands, wash them

thoroughly with soap and water. If ink gets into

your eyes, flush them immediately with water.

Make sure the replacement cartridge is the correct

color, and remove it from its package.

If you're using Archival ink, shake the cartridge gently

before installing it.

Hold the cartridge with the arrow mark on the left

side and pointing to the rear of the printer. Then

insert the cartridge into the slot. Don't force it.

If you can't insert the cartridge smoothly, you

may have the wrong cartridge. Check the

package and product code.

Push the cartridge clamp back into the locked

position. Make sure the corresponding

goes off.

If the Ink Out light remains on, the cartridge

may not be installed correctly. Remove the

cartridge and then reinsert it as described

above.

Close the ink compartment cover.

light

Ink Out