Epson Stylus Pro 10000 Series Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat lunak Epson Stylus Pro 10000 Series. Epson Stylus Pro 10000 Series 13 halaman. Auto take-up reel unit
Juga untuk Epson Stylus Pro 10000 Series: Spesifikasi (6 halaman), Informasi Produk (16 halaman), Panduan Instalasi (26 halaman), Panduan Instalasi Cepat (34 halaman), Panduan Referensi Cepat (12 halaman), Garansi (28 halaman), Panduan Referensi Cepat (12 halaman), Spesifikasi (4 halaman), Spesifikasi (1 halaman), Panduan Perakitan (12 halaman)

Installing the 3-inch take-up reel

core

Note:

If you want to install a 2-inch take-up reel core instead,

see the next section for instructions. Also you can re-

use the core from a used paper roll. See your Online

Guide.

1. Make sure that the lock lever is released

(turned to the left). Slide the movable unit to

the left end of the horizontal strut.

2. Slip one end of the take-up reel core over the

flanged knob on the drive unit.

3. Insert the flanged knob on the movable unit

into the other end of the take-up reel core.

Downloaded from:

http://www.usersmanualguide.com/

4. Turn the lock lever to the front to lock the

movable unit.

The installation of the 3-inch auto take-up reel

unit is complete.

Installing a 2-inch take-up reel core

If you want to use the 2-inch take-up reel core, you

need to reverse the flanges on the drive unit and

movable unit first. Follow the steps below.

1. Make sure that your printer is turned off.

2. Remove the cap and fastener from the drive

unit.