Epson Stylus Pro 4880 Portrait Edition Lembar Spesifikasi - Halaman 5

Jelajahi secara online atau unduh pdf Lembar Spesifikasi untuk Perangkat lunak Epson Stylus Pro 4880 Portrait Edition. Epson Stylus Pro 4880 Portrait Edition 6 halaman. Warranty statement
Juga untuk Epson Stylus Pro 4880 Portrait Edition: Brosur (1 halaman), Brosur & Spesifikasi (6 halaman), Setup Manual (16 halaman), Panduan Referensi Cepat (12 halaman), Manual Jaringan (46 halaman), Panduan Instalasi (4 halaman), Panduan Informasi Produk (16 halaman), Garansi Terbatas (12 halaman)

Make sure the printer is powered on and ready. Press the

roll paper icon appears.

Raise the roll paper support on top of the paper tray cover.

Release the paper lever.

Hold both sides of the paper and feed into the slot.

Feed the paper all the way through the printer

until it is aligned with the OTHERS

mark on the paper tray cover.

Align the right edge with the

vertical mark on the right side

of the tray cover. Then return

the paper lever to the secured

position and close the roll

paper cover.

Load Cut Sheet Paper

When you are ready to print on cut sheet paper, make sure you release the paper lever and wind up the

roll paper. Then return the paper to the secured position and close the roll paper cover. Also, make sure

you lower the roll paper support on the paper tray.

Some paper types cannot be used with the paper tray. You need to load them through the front or

Note:

rear manual feed slots. See the Printer Guide for details.

Remove the paper tray cover and flip up

the paper guide roller.

If your paper size is A3 or larger,

Note:

pull out the paper tray.

Slide the edge guide all the way to the left.

Thumb through a stack of

paper, then gently tap it on a

flat surface to even the edges.

paper source button until the

OTHERS