Epson Stylus Pro 4880 Portrait Edition 사양 시트 - 페이지 5

{카테고리_이름} Epson Stylus Pro 4880 Portrait Edition에 대한 사양 시트을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus Pro 4880 Portrait Edition 6 페이지. Warranty statement
Epson Stylus Pro 4880 Portrait Edition에 대해서도 마찬가지입니다: 브로셔 (1 페이지), 브로셔 및 사양 (6 페이지), 설정 매뉴얼 (16 페이지), 빠른 참조 매뉴얼 (12 페이지), 네트워크 매뉴얼 (46 페이지), 설치 매뉴얼 (4 페이지), 제품 정보 매뉴얼 (16 페이지), 제한 보증 (12 페이지)

페이지 인쇄
Epson Stylus Pro 4880 Portrait Edition 사양 시트
7
Make sure the printer is powered on and ready. Press the
or
roll paper icon appears.
8
Raise the roll paper support on top of the paper tray cover.
9
Release the paper lever.
10
Hold both sides of the paper and feed into the slot.
11
Feed the paper all the way through the printer
until it is aligned with the OTHERS
mark on the paper tray cover.
Align the right edge with the
vertical mark on the right side
of the tray cover. Then return
the paper lever to the secured
position and close the roll
paper cover.
Load Cut Sheet Paper
When you are ready to print on cut sheet paper, make sure you release the paper lever and wind up the
roll paper. Then return the paper to the secured position and close the roll paper cover. Also, make sure
you lower the roll paper support on the paper tray.
Some paper types cannot be used with the paper tray. You need to load them through the front or
Note:
rear manual feed slots. See the Printer Guide for details.
1
Remove the paper tray cover and flip up
the paper guide roller.
If your paper size is A3 or larger,
Note:
pull out the paper tray.
2
Slide the edge guide all the way to the left.
3
Thumb through a stack of
paper, then gently tap it on a
flat surface to even the edges.
paper source button until the
OTHERS