Epson Stylus Pro 7880 ColorBurst Edition - Stylus Pro 7880 ColorBurst Petunjuk Pembongkaran & Penyiapan - Halaman 7

Jelajahi secara online atau unduh pdf Petunjuk Pembongkaran & Penyiapan untuk Perangkat lunak Epson Stylus Pro 7880 ColorBurst Edition - Stylus Pro 7880 ColorBurst. Epson Stylus Pro 7880 ColorBurst Edition - Stylus Pro 7880 ColorBurst 28 halaman. Warranty statement
Juga untuk Epson Stylus Pro 7880 ColorBurst Edition - Stylus Pro 7880 ColorBurst: Brosur (1 halaman), Spesifikasi (2 halaman), Memulai (13 halaman), Brosur & Spesifikasi (8 halaman), Manual Jaringan (46 halaman), Manual (12 halaman), Garansi Terbatas (12 halaman)

Halaman Cetak
Epson Stylus Pro 7880 ColorBurst Edition - Stylus Pro 7880 ColorBurst Petunjuk Pembongkaran & Penyiapan
Tools:
F
G
H
I
F:
Hex wrench
G:
Hex socket head bolts (4)
H:
Wing nuts, spring washers, and washers(2)
H is for connecting the printer unit to the base unit.
I:
Paper feed support films (5)
Assembling the base unit
c
Caution:
Have two people working on either side to
assemble the base unit (20.5 kg).
1. Hold base upright left (A) and a horizontal
strut as shown. Then fix the strut to the base
using the two hex socket head bolts (G) with
the hex wrench (F).
Note:
❏ An instruction sticker about the setting paper
basket is attached to the front of a base upright
right.
❏ Do not fasten the screws too tight. Leave a
room to adjust the position when you fasten
the screw on the other base upright.
G
A
2. Referring to step 1, secure the other side of the
strut to the base (B).
3. Fasten four screws on the both sides of the
base upright securely.
This completes assembly of the base unit. Before
attaching the paper basket, mount the printer on
the base unit.
5