Epson Stylus Pro 7880 ColorBurst Edition - Stylus Pro 7880 ColorBurst Unpacking & Setup Instructions - Page 7

Browse online or download pdf Unpacking & Setup Instructions for Software Epson Stylus Pro 7880 ColorBurst Edition - Stylus Pro 7880 ColorBurst. Epson Stylus Pro 7880 ColorBurst Edition - Stylus Pro 7880 ColorBurst 28 pages. Warranty statement
Also for Epson Stylus Pro 7880 ColorBurst Edition - Stylus Pro 7880 ColorBurst: Brochure (1 pages), Specifications (2 pages), Getting Started (13 pages), Brochure & Specs (8 pages), Network Manual (46 pages), Manual (12 pages), Limited Warranty (12 pages)

Print Page
Epson Stylus Pro 7880 ColorBurst Edition - Stylus Pro 7880 ColorBurst Unpacking & Setup Instructions
Tools:
F
G
H
I
F:
Hex wrench
G:
Hex socket head bolts (4)
H:
Wing nuts, spring washers, and washers(2)
H is for connecting the printer unit to the base unit.
I:
Paper feed support films (5)
Assembling the base unit
c
Caution:
Have two people working on either side to
assemble the base unit (20.5 kg).
1. Hold base upright left (A) and a horizontal
strut as shown. Then fix the strut to the base
using the two hex socket head bolts (G) with
the hex wrench (F).
Note:
❏ An instruction sticker about the setting paper
basket is attached to the front of a base upright
right.
❏ Do not fasten the screws too tight. Leave a
room to adjust the position when you fasten
the screw on the other base upright.
G
A
2. Referring to step 1, secure the other side of the
strut to the base (B).
3. Fasten four screws on the both sides of the
base upright securely.
This completes assembly of the base unit. Before
attaching the paper basket, mount the printer on
the base unit.
5