Toshiba MJ-1101 Adendum Manual Layanan - Halaman 5

Jelajahi secara online atau unduh pdf Adendum Manual Layanan untuk Semua dalam Satu Printer Toshiba MJ-1101. Toshiba MJ-1101 17 halaman. Supplement to the troubleshooting section

Halaman Cetak

Error code

Phenomenon

Possible cause

EA20

- Paper jams at the

5. False operation of the entrance

entrance section of

sensor or the transport sensor

the Finisher (or the

(An error may occur when the

Hole Punch Unit)

entrance sensor or the transport

sensor does not perform proper

- Folded paper edge

detection.)

- Paper jams C2in the

buffer tray section

- C2Paper exit

problems on the

finishing tray

6. False operation of the paper

exit guide

(An error may occur when the

paper exit guide is not operating

properly because paper may

remain on the finishing tray or not

exit properly during sort or

stapling exit.)

7. Paper not placed properly in

the drawer

(Paper may be skewed if there is

extra gap between the paper and

the side wall in the drawer and

thus may cause a jam on the

Finisher transport path.)

Items to confirm / Countermeasures

B. Check if the actuators of the entrance sensor and the transport sensor are operating smoothly. If they are not,

remove the actuator and check if there is any paper dust or foreign matter between the shaft and the hole. Clean if

there is.

Transport sensor actuator

Entrance sensor actuator

Operation check of the transport sensor actuator: Rotate the shaft slowly. If the actuator is not rotated together, its

operation is normal.

Replace SPG-SFFD-SUPT-SF (6LB090140) if the paper exit guide is not operating properly.

Finishing tray

Normal

Side wall

Paper

Transport sensor actuator

Paper exit guide

Abnormal

Gap

Precautions / Remarks

Transport sensor actuator

Hook this to the actuator.

Hook this onto the bracket.

Be sure to lock the side wall.