Toshiba MJ-1101 Дополнение к руководству по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Дополнение к руководству по эксплуатации для Принтер "все в одном Toshiba MJ-1101. Toshiba MJ-1101 17 страниц. Supplement to the troubleshooting section
Печатать страницу
Error code
Phenomenon
Possible cause
EA20
- Paper jams at the
5. False operation of the entrance
entrance section of
sensor or the transport sensor
the Finisher (or the
(An error may occur when the
Hole Punch Unit)
entrance sensor or the transport
sensor does not perform proper
- Folded paper edge
detection.)
- Paper jams C2in the
buffer tray section
- C2Paper exit
problems on the
finishing tray
6. False operation of the paper
exit guide
(An error may occur when the
paper exit guide is not operating
properly because paper may
remain on the finishing tray or not
exit properly during sort or
stapling exit.)
7. Paper not placed properly in
the drawer
(Paper may be skewed if there is
extra gap between the paper and
the side wall in the drawer and
thus may cause a jam on the
Finisher transport path.)
Items to confirm / Countermeasures
B. Check if the actuators of the entrance sensor and the transport sensor are operating smoothly. If they are not,
remove the actuator and check if there is any paper dust or foreign matter between the shaft and the hole. Clean if
there is.
Transport sensor actuator
Entrance sensor actuator
Operation check of the transport sensor actuator: Rotate the shaft slowly. If the actuator is not rotated together, its
operation is normal.
Replace SPG-SFFD-SUPT-SF (6LB090140) if the paper exit guide is not operating properly.
Finishing tray
Normal
Side wall
Paper
Transport sensor actuator
Paper exit guide
Abnormal
Gap
Precautions / Remarks
Transport sensor actuator
Hook this to the actuator.
Hook this onto the bracket.
Be sure to lock the side wall.