Philips DVD Micro Theater MCD988 Panduan Pengguna - Halaman 44

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem stereo Philips DVD Micro Theater MCD988. Philips DVD Micro Theater MCD988 46 halaman. Dvd micro theatre
Juga untuk Philips DVD Micro Theater MCD988: Brosur & Spesifikasi (2 halaman), Lembar Spesifikasi (3 halaman), Panduan Pengguna (46 halaman), Panduan Pengguna (43 halaman), Panduan Pengguna (43 halaman), Panduan Pengguna (48 halaman), Panduan Servis (36 halaman)

Troubleshooting

The remote control does not function.

The display is dark.

Low hum or buzz sound.

Low bass response.

Unable to select Progressive Scan.

No sound is output from the HDMI jack.

No sound and picture

✔

Select the correct source (DISC or TUNER, for

example) before pressing the function button.

✔

Point the remote control at the remote sensor

of the unit.

✔

Reduce the distance to the player.

✔

Remove any possible obstacles.

✔

Replace the batteries with new ones.

✔

Check that the batteries are loaded correctly.

✔

Press DIM again.

✔

Place the DVD micro system as far away as

possible from electrical devices that may be

causing interference.

✔

Check all speakers for correct polarity.

✔

Check that the output of the video signal is

switched to 'Pr/Cr Pb/Cb Y'.

✔

Check the connection between the TV and the

HDMI jack of the DVD player.

✔

See if the TV suppor ts this 480p/576p/720p/

1080i DVD player.

✔

Check your TV system setup correctly.

✔

Check that the RGB/SCART cable is connected

to the correct device (See Connecting TV).