Philips DVD Micro Theater MCD988 User Manual - Page 44

Browse online or download pdf User Manual for Stereo System Philips DVD Micro Theater MCD988. Philips DVD Micro Theater MCD988 46 pages. Dvd micro theatre
Also for Philips DVD Micro Theater MCD988: Brochure & Specs (2 pages), Specification Sheet (3 pages), User Manual (46 pages), User Manual (43 pages), User Manual (43 pages), User Manual (48 pages), Service Manual (36 pages)

Philips DVD Micro Theater MCD988 User Manual
Troubleshooting
The remote control does not function.
The display is dark.
Low hum or buzz sound.
Low bass response.
Unable to select Progressive Scan.
No sound is output from the HDMI jack.
No sound and picture
44
Select the correct source (DISC or TUNER, for
example) before pressing the function button.
Point the remote control at the remote sensor
of the unit.
Reduce the distance to the player.
Remove any possible obstacles.
Replace the batteries with new ones.
Check that the batteries are loaded correctly.
Press DIM again.
Place the DVD micro system as far away as
possible from electrical devices that may be
causing interference.
Check all speakers for correct polarity.
Check that the output of the video signal is
switched to 'Pr/Cr Pb/Cb Y'.
Check the connection between the TV and the
HDMI jack of the DVD player.
See if the TV suppor ts this 480p/576p/720p/
1080i DVD player.
Check your TV system setup correctly.
Check that the RGB/SCART cable is connected
to the correct device (See Connecting TV).