Toshiba TDP-MT700 Panduan Pemilik - Halaman 21

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Proyektor Toshiba TDP-MT700. Toshiba TDP-MT700 34 halaman. Home theater projector
Juga untuk Toshiba TDP-MT700: Panduan Pemilik (36 halaman), Panduan Servis (49 halaman)

Halaman Cetak

English

Adjust the image

Adjusting the angle height

There are two adjuster feet on the bottom of the projector. These

adjuster feet change the image height and projection angle. To

adjust the projector, you can screw the height adjuster feet to

fine-tune the projection angle.

If the screen and the projector are not perpendicular to each other,

the projected image becomes vertical trapezoidal. To correct this

problem, adjust the value of Keystone in the Setup menu.

Auto-adjusting the image

With one press of the Auto button on the projector, the built-in intelli-

gent auto-adjustment function will re-adjust the values of Frequency

and Clock to provide the best image quality.

The current source information will be displayed at the bottom right of

the screen for 3 seconds.

The screen will be blank while Auto adjustment is functioning.

Fine-tuning the image size and clarity

1. Adjust the projected image to the size that

you need using the zoom ring.

Optimizing the image

To optimize the image, use the remote control or on-screen menus. For the operation of on-screen

menus, please refer to

The following steps are optional. You do not need to follow every step. It depends on the image qual-

ity you desire.

p.26

2. Then sharpen the image by rotating the

focus ring.

Using the projector and remote control