Toshiba TDP-MT700 Посібник користувача - Сторінка 21
Переглянути онлайн або завантажити pdf Посібник користувача для Проектор Toshiba TDP-MT700. Toshiba TDP-MT700 34 сторінки. Home theater projector
Також для Toshiba TDP-MT700: Посібник користувача (36 сторінок), Посібник з експлуатації (49 сторінок)
Друкувати сторінку
English
Adjust the image
Adjusting the angle height
There are two adjuster feet on the bottom of the projector. These
adjuster feet change the image height and projection angle. To
adjust the projector, you can screw the height adjuster feet to
fine-tune the projection angle.
If the screen and the projector are not perpendicular to each other,
the projected image becomes vertical trapezoidal. To correct this
problem, adjust the value of Keystone in the Setup menu.
Auto-adjusting the image
With one press of the Auto button on the projector, the built-in intelli-
gent auto-adjustment function will re-adjust the values of Frequency
and Clock to provide the best image quality.
The current source information will be displayed at the bottom right of
the screen for 3 seconds.
The screen will be blank while Auto adjustment is functioning.
Fine-tuning the image size and clarity
1. Adjust the projected image to the size that
you need using the zoom ring.
Optimizing the image
To optimize the image, use the remote control or on-screen menus. For the operation of on-screen
menus, please refer to
The following steps are optional. You do not need to follow every step. It depends on the image qual-
ity you desire.
.
p.26
2. Then sharpen the image by rotating the
focus ring.
Using the projector and remote control
21