MSI MS-S0031 Panduan Pengguna - Halaman 15
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Papan Server MSI MS-S0031. MSI MS-S0031 39 halaman. (v1.x) server board
Halaman Cetak
M
eMory
The SO-DIMM slots are ntended for memory modules.
Installing Memory Modules
1.
The memory module has only one notch on the center and will only fit in the
right orientation.
2.
Insert the memory module vertically into the DIMM slot. Then push it in until
the golden finger on the memory module is deeply inserted in the DIMM slot.
The slot clip at each side of the DIMM slot will automatically close when the
memory module is properly seated.
3.
Manually check if the memory module has been locked in place by the DIMM
slot clips at the sides.
Important
•
You can barely see the golden finger if the memory module is properly inserted
in the DIMM slot.
•
To enable successful system boot-up, always insert the memory modules into
the DIMM1 first.
DDR3 SO-DIMM Slot
MS-S0031
MS-S0031
2-3