MSI MS-S0031 사용자 설명서 - 페이지 15
{카테고리_이름} MSI MS-S0031에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. MSI MS-S0031 39 페이지. (v1.x) server board
페이지 인쇄
M
eMory
The SO-DIMM slots are ntended for memory modules.
Installing Memory Modules
1.
The memory module has only one notch on the center and will only fit in the
right orientation.
2.
Insert the memory module vertically into the DIMM slot. Then push it in until
the golden finger on the memory module is deeply inserted in the DIMM slot.
The slot clip at each side of the DIMM slot will automatically close when the
memory module is properly seated.
3.
Manually check if the memory module has been locked in place by the DIMM
slot clips at the sides.
Important
•
You can barely see the golden finger if the memory module is properly inserted
in the DIMM slot.
•
To enable successful system boot-up, always insert the memory modules into
the DIMM1 first.
DDR3 SO-DIMM Slot
MS-S0031
MS-S0031
2-3